Description

AiM Steering Angle Sensor, Belt Type (Auto)

The steering shaft pulley is designed to fit a 7/8″ diameter shaft. Smaller shafts will need to add a bushing to fit the pulley. This sensor is designed to measure up to 5 complete turns of the steering column.

This sensor can connect directly to the AiM MXL Pista / Pro dash, MXL2 / MXG / MXS dashes, or the EVO3 series data loggers. The MyChron3 XG-Log and the EVO4 logger both require a 712-719 Patch Cable (Part No. MC-210).
We also offer the Replacement AiM Steering Angle Sensor Belt (Part No. MC-336) separately.
DiscoveryParts Pro Tip: When mounting the sensor, locate the mount a little farther away than you might expect and use shims to bring the supplied bracket closer. If the belt tension is too loose, remove a shim or two to adjust.
If your steering column is larger than 7/8″, consider using the AiM String Pot Steering Angle Sensor (Part No. LX-PA-10-AIMSP) instead. The String Pot can work with any diameter steering shaft.